Compatible Polyurethane and Acrylic/Epoxy Products
We sell a select group of coatings and sealants that are compatible with our epoxy products. These are very high quality products and we have tested them extensively. We list them here for your information, with links to additional information about the products. Our entire polyurethane line can be reviewed by clicking here.

3M™ 4200
3M™ 4200 is a fast skinning, low modulus, general purpose, 100% polyurethane sealant with good adhesive characteristics for bonding, bedding and sealing under normal conditions.
For additional information, click here.

3M™ 5200
3M™ 5200 is a high strength polyurethane bonding sealant for joints, seams and junctions where adhesive strength is of primary importance.
For additional information, click here.

UNISEAL
UNISEAL is a penetrating water-based epoxy primer for concrete, fiberglass and steel surfaces. UNISEAL is a clear, single-component epoxy primer/sealer. It incorporates state of the art water-based technology to produce an extremely versatile product which penetrates and seals porous substrates. It is effective at increasing the bond of acrylic, polyurethane, butyl and epoxy topcoats to a variety of surfaces. It will also help to “solidify” loose or chalky surfaces. UNISEAL is safe to use, has very little odor, and is easy to clean up.

We do not recommend that UNISEAL be used on wood. It will do very little to protect the wood from rot and deterioration.

UNISEAL is designed to penetrate and seal porous substrates and to improve the adhesion of high performance topcoats. It develops a tenacious bond to concrete, fiberglass, steel, galvanized and aluminum surfaces. Although UNISEAL will greatly enhance the adhesion of various topcoats over metal surfaces, it is not designed to add to the corrosion resistance of the system, beyond what the topcoat provides.

UNISEAL will effectively solidify loose or chalky concrete or masonry surfaces when used as a primer prior to top coating. It is also designed to be used on its own as a transparent sealer over interior concrete floors to provide dust proofing and enhanced cleanability characteristics. UNISEAL will amber slightly when used on exterior surfaces without a topcoat.

UNISEAL is manufactured in standard Clear. For additional information on UNISEAL, click here.

Rhino Top™
Rhino Top™ is a water-based acrylic/epoxy exterior coating emulsion that can be used with non-skid sand in suspension. For application to primed wood, concrete, asphalt. Coverage is 200-250 sq. ft. per gallon and at least two (2) coats are required for adequate thickness.
For additional information, click here.

Elasta-Tuff™ 6000-AL-HS and Accelerator
Elasta-Tuff™ 6000-AL-HS is a single-component liquid-applied elastomeric, abrasion resistant polyester-polyurethane finish/final coating. It is a flexible, UV stable top coating suitable for any surface that will accept paints and coatings. Its durability makes it useful for harsh environments such as high traffic areas, or boat decks and hulls that have to survive in a harsh marine environment. Elasta-Tuff™ Accelerator is recommended as an additive to Elasta-Tuff™ 6000-AL-HS when applying at lower temperatures.
For additional information, click here.

Elastuff 120™
ELASTUFF 120™ is a two component, 100% solids polyurethane base coating for wood, fiberglass, concrete or steel. Coverage is approximately 100 sq. ft. per gallon and at least two coats are required to get adequate thickness. One unit consists of parts A & B (mix 1:1).
For additional information, click here.